4706 - Amucor foil with reinforcement net

Amucor foil with reinforcement net for EMI shielding where a strong but also very wide shielding film is required.

Many EMI problems can be solved easily by the use of Amucor foil or tape. When there is a very broad and strong shielding foil required, than our 4706 Amucor foil with reinforcement net can provide the solution. The shielding foil can be produced with or without (conductive) self-adhesive and an optional insulation layer.

Amucor foil with reinforcement net can be cut to any width and can be delivered from stock. The most commonly used width is 1000 mm. Standard roll length is 16.5 meters.

Amucor foil with reinforcement net can also be deliver as die-cut, according to your drawing, on strip or in pieces (as a sticker), with optional self-adhesive.


Applications

  • EMI shielding of plastic enclosure parts (EMI/RFI shielding tape/gasket)
  • Shielding all non-conductive materials
  • Ground plane
  • Antistatic floor (ESD floor)
  • Electrical connection between surfaces (sheets / foils)
  • Die-cuts
  • Shielding in housings and Faraday cages
  • Temporary shielding during tests
  • Mounting transparent foils, windows for EMI/RFI shielding
  • Cable shielding (Wrap arround the cable)
  • Temporary shielding during emission and immunity tests

Options

  • Fire-retardant version
  • With (conductive) self-adhesive backing
  • With insulation layer
  • Die-cutting in any shape according to CAD drawing
Amucor foil with reinformence net for EMI/RFI shielding
Amucor foil with reinforcement net for EMI/RFI shielding
We can cut all our EMI/RFI shielding tapes to any specific width
We can cut all our EMI/RFI shielding tapes to any specific width
With our automated CNC cutting system, we can cut Amucor foil in large quantities and according to your CAD drawing
With our automated CNC cutting system, we can cut Amucor foil in large quantities and according to your CAD drawing

Amucor foil with a reinforcement net (4706)

Amucor foil can also be produced with a strengthening reinforcement net. Because the material with the reinforcement net is so strong, it can be produced in a very large width of 3100 mm. This material is designed to cover walls and floord for protection against unwanted radio frequencies (RF). The material can also be used to very quickly create a shielded room, for example from a wooden box.

Amucor foil with a reinforcement net can be produced as a foil (4706) without self adhesive but can also be produced as tape (4707), with standard adhesive or as tape (4708) with conductive adhesive.

4706 - Amucor foil with reinforcement net technical drawing
4706 - Amucor foil with reinforcement net technical drawing
4706 - Amucor foil with reinforcement net example image
4706 - Amucor foil with reinforcement net example image

Shielding performance

In the table below you will find the shielding characteristics of Amucor foil.

There are many factors that influence the true effectiveness of a EMI/RFI shielding tape when applied, such as type and thickness of foil, type of adhesive, closeness of contact, smoothness of application surface, strength and frequency of the EMI/RFI signal, etc. Still, an attenuation value can be determined using standard tests and fixtures.

For Amucor tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (10 KHz to 20 GHz).
For more specifications see table and graph below.

FieldFrequencyAmucor-foil
  0.04 mm thick
E 1 MHz 121 dB
E 10 MHz 110 dB
E 100 MHz 103 dB
E 400 MHz 98 dB
P 1 GHz 92 dB
P 10 GHz 85 dB
These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.

4706 series - Amucor foil with a reinforcement net

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 4706 series - Amucor foil with a reinforcement net (38)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.


Technical specification and part numbers

Part number
(As foil, without adhesive)
470147164706
Part number
(Tape, with standard adhesive)
470247174707
Part number
(Tape, with conductive adhesive)
470347184708
Part number
(As foil, with insulation layer
(UL94V-0) 0.15 mm (white))
470447194709
Part number
(As foil, with insulation layer
(UL94V-0) 0.22 mm (black)
470547204710
Construction 4706 - Amucor foil with reinforcement net
Foil material Amucor Amucor and PET Amucor with a reinforcement net
Surface bright bright bright
Foil thickness 0.023 mm 0.35 mm -
Total thickness 0.048 mm 0.3725 mm -
Adhesive synthetic conductive resin synthetic conductive resin -
Adhesive performance 4.5 N/cm 4.5 N/cm -
Tensile strength - - -
Temperature resistance - - -
El. resistance through adhesive 0.003 Ohm 0.003 Ohm 0.003 Ohm
When tape, standard roll widths (mm) * 10, 25, 50, 100 10, 25, 50, 100 10, 25, 50, 100
When foil, standard foil widths (mm) * 1100 1100 3100
Roll lengths* 16.5 m 16.5 m 100 m
These values are measured under laboratory conditions.
In your situation results may differ, please read our Guarantee.

* Other on request

To get a quotation for Amucor Folie mit einem Verstärkungsnetz within 24 hours fill in the form below.

Part number
See part number table above for other embodiments of the shielding film
Width (mm)
Amucor foil with reinforcement net can be delivered up to 3100 mm en is suitable for shielding a complete room. Other foils can be deliverd up to 1100 mm width.
* Note: The red blocks are required