PET film deposited with copper grid and protected with a nickel layer
Holland Shielding Systems BV is specialized in manufacturing transparent EMI shielding foils and films.
This transparent conductive Metal Mesh PET film is optical PET film deposited with copper grid and protected with a nickel layer. This film conducts better than our best 9900 series Transparent shielding foil and is only a fraction less transparent. This film has a conductive layer with a very fine etched mesh that is one with the transparent carrier.
Transparent conductive Metal Mesh PET film remains very high transparency, this film is extreme low resistance for high frequency EMI shielding application and is easy to apply. The copper mesh is almost invisible.
Protective film + EMI shielding layer + optinal adhesive (option A) + release layer. Due to the random structure none or almost no moire effect is visible when applied to an display.
|Basic thickness||75~100μm||Thickness tester|
|Adhesion strength||500~1500gf/25mm||To glass|
|Adhesion between PET and conductive layer||Grade 2||GB-9286-88|
|Based on SJ 20524-1995 Electronics military standard, tested by PLA(People Republic Army)|
|See our guarantee|
|Item||Unit||Performance index||Detection method||remark|
|85 Mesh/OPI||250 Mesh/OPI|
|Thickness||Protective film||μm||50～60||ASTM D374||Material:PE|
|EMI Shielding Layer||μm||100±5||Material:PET|
|Adhesive||μm||20±5||Optical acrylic adhesive gum|
|Mesh shape||45° quadrate|
|Visible Light Transmittance||%||≥80||≥40||GB/T 2410-2008|
|Surface resistance （conductive side）||Ω/□||≤0.2；≤0.4；≤ 0.6||≤0.1||85 Mesh : four point probe
250 Mesh : CDE resmap
|adhesive force （conductive side)||At least two-stage||GB/T 9286-1998|
|Gum peel strength||g/25mm||≥100||GB/T 2792-1998||For glass panel|
|wet-hot resisting performance||resistance variation||%||≤30||65℃ 、90% 、100hours||ΔR/R0|
|Light transmittance change||%||≤5||ΔT/T0|
|Shielding Effectiveness||In30MH~1000MHz damping capacity ≥ 30dB||SJ 20524-1995|
Please note : top layer can be affected by acid for example from the skin. To protect the conductive layer, you can apply a transparent film or use the adhesive side on top.
Small optical defects are allowed in this product. If you require a product that has absolutely no optical defect then contact us for the "superior selected quality". Please realize that by the extreme caution act in production these products can be several times more expensive.
To get a quotation for Copper grid PET film (transparent) within 24 hours fill in the form below.
Give us feedback?Visit our old website