Please make your selection out of Ferrite tiles, flexible absorber sheets, microwave absorber foam or pyramidal absorbers

Select one of the products below to continue

Ferrite tiles, flexible absorber sheets and pyramidal absorbers are made for absorbing electromagnetic radiation. Ferrite tiles and pyramidal absorbers are used to create for example, anechoic chambers or boxes. Flexible absorber sheets are generally used to absorb radiation at the radiation source in electronic enclosures. Microwave absorber foam can be used at higher frequencies than traditional shielding and can also be used with other EMI/RFI shields to extend frequency range.

Ferrite absorbers

VHF ferrite absorber tiles
3600

Very high frequency ferrite absorber tiles are the standard solution in the industry, they have an excellent overall performance versus cost.

UHF ferrite absorber tiles 3610

The ultra high frequency ferrite absorber tiles provide excellent electromagnetic absorption in the UHF band. For mobile phone inspection boxes and EMC chambers.

Double layer ferrite absorber tiles 3620

Double layer ferrite absorber tile is a special design for small EMC Anechoic chamber to get excellent electromagnetic absorbtion performance in 30MHz to 2GHz.

Hybrid pyramidal EM absorber 3630

Wide band hybrid EM absorbers are suitable to build small anechoic chambers. In anechoic chambers, absorption can increase from 1GHz to 18GHz by these piramid absorbers.

EMI Flexible absorber sheets

EMI Flexible absorber sheets 5780

EMI flexible absorber sheets are developed for electromagnetic wave absorption and noise suppression. Solve EMC problems by attaching these sheets on noise sources.

These absorbers operate approximately between 1 GHz and 18 GHz and have a return loss of max. -6 dB

High performance EMI absorber sheets 5790

High performance EMI/RFI absorber sheets

High performance EMI flexible absorber sheets are developed for EM wave absorption and noise suppression. Solve EMC problems by attaching on noise sources.

These absorbers operate approximately between 1 GHz and 6 GHz and have a return loss of max. -11 dB

Rubber flat narrowband absorber 5795

Rubber flat narrowband absorber

These sheets are mainly applied for the reflecting of metal components inside the radar cabin or for other applications that require a thin sheet and no broadband absorption.

These absorbers operate approximately between 2 GHz and 40 GHz and have a return loss of max. -18 dB

Microwave absorber foam 3500

Microwave absorber foam for EMI/RFI Shielding

This RoHS compliant coated open cell foam is used as a microwave absorbing material, especially for applications with frequencies ranging between 1 and 17 GHz.

These absorbers operate approximately between 1 GHz and 17 GHz  and have a return loss of max.  -16 dB

Broadband hybrid pyramidal absorbers / PU Foam based microwave absorbers

PU Foam based pyramid absorbers 3640

These absorbers are the most populair solution for  EMC chambers of 3m, 5m and 10m.

PU Foam based flat absorbers 3650

PU Foam based flat absorbers

These absorbers are the most populair solution for  EMC chambers of 3m, 5m and 10m.

Hybrid absorbers for EMC anechoic chamber 3660

PU Foam based flat absorbers

Same performance in low frequency as PU Foam based pyramid absorbers 3640 but its performance in high frequency might be slightly declined

PU Foam based wedge absorbers 3670

PU Foam based wedge absorbers

The main advantage is to reduce the back scattering of pyramid absorbers and obtain higher quietness of quiet zone

Nonflammable high power handing absorbers 3680

Nonflammable high power handing absorbers

Nonflammable high power handing absorber, is a non-woven fabrics based hollow broadband microwave absorbers with fire retardant and microwave absorption impregnated

High power handing microporous pyramid absorbers 3690

Nonflammable high power handing absorbers

These are mainly applied in high power shield cabinet and ventilation vents of anechoic chambers

High power SiC Pyramide absorbers 3695

Nonflammable high power handing absorbers

These are mainly applied in high power shield cabinet and ventilation vents of anechoic chambers

Rubber pyramid absorber 5796

Rubber pyramid absorbers

Absorbs electromagnetic radiation between 1 and 40 GHz. Between the 6 dB and 25dB depending on the particular frequency range.

Would you like to...

Give us feedback?

Visit our old website