9520 EMC woven mesh ventilation panel

EMC Woven mesh ventilation panel used for heating, air flow for cooling and ventilation in electronic enclosures.

EMC woven mesh ventilation panel

EMC Woven mesh ventilation panels are used for heating, air flow for cooling and ventilation in electronic enclosures without compromising the shielding integrity of an enclosure.

Aluminum EMC Woven mesh ventilation panels consist of 3 layers of pleated aluminium woven mesh, trapped between aluminum kick-plates, in a rigid aluminium frame, pre-drilled or with fasteners made to your specifications or flow drilled thread holes.

The 3 layers of pleated wire mesh are separated by the pleats being of different height enabling the vent to have a high dust holding capacity.

Approximately 95% of the 9520 series EMC Woven mesh ventilation panels are made to customer specifications, and are all made to comply an order.

These panels can be treated with a variety of finishes to provide corrosion protection or improve conductivity. Air filter oil can be applied to the alumi- nium filter media to assist in dirt and dust retention. Panels with a gasket groove have a knitted monel wire mesh gasket as standard. Other frames can be provi- ded with an additional EMI Gasket.

Standard delivery time: less than two weeks.

 

EMC woven mesh ventilation panel
9520 EMC woven mesh ventilation panel

Options (on request)

  • EMI gasketing
  • Environmental sealing
  • Kempass (RoHS) aluminum passivation finish

Benefits

  • Light weight
  • High shielding performance
  • Very low air-flow resistance
  • Reduction of turbulence

EMC gasket options

  • 1200 series Metal knit gasket (Only frames with a gasket groove)
  • 5711-5722 series Orientated wire shield gasket
  • 1200 series Metal knit gasket with a Neoprene sponge carrier 2.4mm thick
  • 2000 series Beryllium Copper finger strip

* Other gasket options on request


Attenuation levels (dB)

FrequencydB
0.01 MHz 42
0.1 MHz 53
1.0 MHz 61
10.0 MHz 81
100 MHz 60
1000 MHz 52
10000 MHz 43

Design and constructional tips

In your design, you can take into consideration moi- sture and dust protection through:

  • Color coated frame (leave a part free of coating for contact)
  • External overhang for rain protection
  • Holes for drainage
  • Aerodynamic drag
  • Additional EMC gasketing
  • Try to avoid round vents because its complexity and therefore expensive production
  • Prevent holes in corners of the frame because of the rigidity of the frame when compressing the gasket
  • If specifying captive inserts in both sides of the frame off-set the position by 10mm minimum

Finishes (on request)

  • Painted (frame only for dust panels)
  • Electro less plated Tin or Nickel
  • Kempass (RoHS ) Aluminium Passivation process
  • Trivalent chromium (RoHS compliant) or Hexavalent chromium

Frame options

9520 EMC woven mesh ventilation panel Frame A
Frame A
9520 EMC woven mesh ventilation panel Frame B
Frame B
9520 EMC woven mesh ventilation panel Frame C
Frame C
9520 EMC woven mesh ventilation panel Frame D
Frame D
9520 EMC woven mesh ventilation panel Frame E
Frame E

Air flow pressure drop graph

9520 series - Air flow pressure drop graph

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 9520 series - Air flow pressure drop graph (43)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.


Our capabilities

Holland Shielding Systems BV manufacture its range of EMC vent panels using the latest technology. All processes are kept in house, giving us flexibility and total control over quality. We are market leaders for price, delivery, quality and availability. Our fully programmable CNC machines guarantee a good steady quality.

To get a quotation for EMV-Netzgewebe Lüftungsblende within 24 hours fill in the form below.

Most of the 9520 series EMC Woven mesh ventilation panels are made according to customer’s specifications. When requesting for a quotation for EMC Woven mesh ventilation panels, the following information should be provided:

Series
Height (mm)
The height in mm of the honeycomb, including the frame
Width (mm)
The width in mm of the honeycomb, including the frame
Frame type
Select an option:
A : Frame A
B : Frame B
C : Frame C
D : Frame D
E : Frame E
Drill patern
Select an option:
DS : Standard drill patern (We make mounting holes at our discretion)
DC : Custom drill patern (You need to send a drawing with specified where you want the holes for mounting)
* Note: The red blocks are required
akzeptierte Datei-Endung
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip

4800

Flexible shielding tube

2800

Door fingers

Visit our old website